Styrkort F405-HDTE med stöd för såväl Analogt som Digitalt (DJI) FPV-system.

Tillverkarens info - kika här!  (Rekommenderas starkt!)

Features:
STM32F405 has 1MB flash which can run ArduPilot/INAV/BetaFlight
InvenSense the 3rd generation IMU ICM42688-P
9-60V(3-12S LiPo) wide input voltage and voltage sense. and a 9-16V BEC for DJI OSD or analog VTX.
8motors+3servos in INAV/BF multirotor mixer.
2x SH1.0_8pin connector for PnP with 2x 4in1 ESC
1x SH1.0_6pin connector for PnP with HD System(Caddx Vista & Air Unit)
USB pin breakout for connecting to external USB adapter.

Specifications:
MCU: STM32F405RGT6
IMU: ICM42688-P
OSD: AT7456E, DJI OSD
Baro: SPL06-001 (I2C)
Blackbox: 16M-byte Flash memory
6x UARTs,  1x Softserial_Tx option
12x PWM outputs (8x Dshot)
1x I2C
4x ADC (VBAT, Current, RSSI, Airspeed)
2x PINIO
2x SH1.0_8pin connector for 4in1 ESC
1x SH1.0_6pin connector for HD System(Caddx Vista & Air Unit)
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
9-16V(Vxs) output ON/OFF switchable
Dual analog camera signal switchable

Power:
Input: 9-60V (3-12S LiPo)
BEC: 5V 1.5A
BEC: Vx,  9-16V/1-2A (3S IN/9V 2A, 4S IN/12V 2A, 6S IN/16V 2A, 8S IN/16V 1.5A, 12S IN/16V 1A)
Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)
No Current Sensor built-in, supports external current sensor of PDB/4in1

Firmware:
ArduPilot: MatekF405-TE
INAV: MATEKF405TE
BetaFlight: MATEKF405TE

Physical:
Mounting: 30.5 x 30.5mm, Diam. 4mm with Grommets diam. 3mm
Dimensions: 36 x 36 x 5 mm
Weight: 7g

Including:
1x FC F405-HDTE
6x Silicon grommets M4 to M3
1x SH1.0_8pin cable 5cm,  2x SH1.0_8pin connectors
1x SH1.0_6pin to GH1.25_8pin cable 8cm for HD System(Caddx Vista & Air Unit)