FMS 70MM Yak 130 High Performance Gray PNP
Here comes the first of a new series of planes from FMS, the new 70mm Ducted Fan Yak130!
FMS has been committed to the development and production of propeller aircrafts for years, and we have never stopped enhancing our products from the year we were founded. Utilizing many of the new concepts from our propeller planes, FMS is upgrading and adding new and exciting Electric Ducted Fans to our lineup of planes.
The first in line for improvement is our NEW Yak130 featuring our new and improved 70mm fan unit. The craftsmanship that has gone into this model began with the initial concept prototype. After which, refinements were determined and implemented, bringing to you the most accurately defined Yak on the current market.
Some of the improvements and redesign include a plastic leading edge on the air inlet duct, providing a smooth flow of air into the duct while protecting the inlet from possible damage from a less than perfect landing. Everything, from the panel lines, cockpit interiors and scaled pilot down to the removable drop fuel tank are finely detailed. Even assembly has been redesigned to make your time in getting ready for flight quick and easy. There is a main spar tube that runs through the fuselage and wing to help strengthen the airframe which is then fastened with screws. The surface control horns and wires are preinstalled and utilize our ball link design making for very accurate flight control.
The overall performance has been a major consideration for the Yak, and using our latest 12-blade 70mm ducted fan, together with the Predator 2860-KV1850 motor, 70 AMP ESC has resulted in great power and speed with a 6S battery. The added bonus to this power system, is the sound this new 12 blade makes. You can hear the power it provides. The landing gear retract units use a 3.5 strut wire for support and strength for those less than perfect landings. All servos are pre-mounted and are our own digital design, making for precise maneuvers whether in high or low speed flight.
We have incorporated our new environmentally friendly water-based paint. The water-based paint has provided better spreadability and a glossier appearance. It can protect the fragile foam parts under any condition.
Features:
Scaled appearance, with pilot, oil tank, retractable landing gear
Powerful inner running motor with latest 70mm 12 blades ducted plus the high quality Predator 70A ESC
Metal digital servos for better controlling capacity
Retractable front and rear landing gear
Function Flaps
Ball link design
Button type canopy, set free from fall-off problem
The simplified assembly structure of main wing set
Water-based paint for better color and gloss
Specs:
Wingspan: 800 mm
Overall Length: 1060 mm
Flying Weight: 1900 g
Motor Size: 2860 KV1850
ESC: 70A
Servo: 8x 9g
Rec Radio: 6 Channels
CG (center of gravity): 80-85mm
Recommended Battery: 22.2V 2600-3300mAh 35C LiPo
Aileron: Yes
Elevator: Yes
Rudder: Yes
Flaps: Yes
Retracts: Yes
Approx. Flying Duration: 5 min
Minimum Age Recommendation: 14+
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: 30 minutes
Is Assembly Required: Yes
Material: Durable EPO
Requires: Radio System, Battery and Charger
Driftsätt: El
Levereras som: Almost-Ready-To-Fly
Lämplig för: Expert
Plantyp: Ducted Fan
Spännvidd: 800 mm
Längd: 1060 mm
Material: Foam
Vikt: 1900 g
Fartreglage: 70A BL
Sändare: Ingår Ej
Motor: BL 2860-1850KV
Motortyp: Borstlös
Skevroder: Ja
Flaps: Ja
Infällbara Landställ: Ja
Batteri: Ingår Ej
Inkluderar även: 8st Servon
Behöver kompletteras med: 6S Li-Po Batteri, Sändare & Mottagare, Laddare