BLX200 BRUSHLESS 1/8 SCALE MT 6S ESC

The BLX200 150A waterproof ESC provides consistent power control and is 6S LiPo ready. Fitted with super-reliable XT90 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX200 ESC has over voltage protection, and a two-stage LiPo cut off for added cell management. The BLX200 ESC features user adjustable parameters that include the punch setting, brake force strength and motor rotation direction. These parameters can be set simply using the setup button located on the ESC switch. The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.

For more information on the BLX200 Power System please see our Power Systems page here.

Recommended battery specification:
3000mAh - 35C minimum - Per battery pack (battery specification dependent on model/usage)

Features:
3S to 6S LiPo Compatibility
150A Continuous Current Handling
6V/6A BEC Circuit
5 Punch Level Settings
3 Brake Strength Settings
Adjustable Motor Rotation Direction
Over-Temperature Protection
2-Stage LiPo Cut Off
Genuine AMASS XT90 Battery Connectors

Includes:
1x BLX200 ESC
2x Female AMASS XT90 Connectors (for battery packs)
1x Instruction Manual

Specs:
POWER TYPE: BLX Brushless Extreme Performance
ESC TYPE: 150AMP Continuous current capacity
Battery usage: 4S LiPo (14.8) up to 6S LiPo (22.2V) Pack maximum
Low Voltage Cut-Off (LVC): 3.2V per cell
Thermal Protection Temperature: 105°C
Over-Voltage Protection: Over 6S LiPo (22.2V)
Length: 57.5 mm
Height: 38.9 mm
Width: 47.1 mm
Weight: 218 g
Capacitor Length: 41 mm
Receiver Wire Length: 220 mm
Battery Wire Length: 220 mm
Motor Wire Length (Including Connector): 135 mm
Switch Length: 21.3 mm
Switch Width: 13.1 mm
Switch Height: 16 mm
Motor Bullet Connector Size: 5.5 mm
Wire Specifications: 10AWG
ESC Battery Connector Type: XT90