Applikation: Bil
Motortyp: Borstlös
Special: Komplett motorsystem
Brawn and Brains.
It's time for 1/5th scale buggies, trucks and on road cars to experience the incredible torque and speed of Castle electric drive. Mamba XL2 is the only controller on the market able to handle the loads required to power these surprisingly heavy vehicles to insane speeds.
We can prove it too, as the Mamba XL2 features all of the standard Mamba series programming features PLUS, data logging. Use the data from the controller to measure parameters such as your battery volts, battery ripple voltage, amp draw, motor rpm, and controller temperature. This is a great way to make sure that the rest of your setup is performing within its limits.
Powerful 1/5th scale Combo
The Mamba XL2 and newly updated 2028 Extreme motor are the perfect combination for large-scale, ultra high-performance RC vehicles. Have you ever seen a 1/5th scale Baja doing 112 kmh? If you’ve got the traction, this Castle combination has the power and control to get you there.
The Mamba XL 2 and 2028 motor are recommended and warrantied in vehicles weighing less than 11 kg for 4WD and 13.6 kg for 2WD. Any use outside of these recommendations may lead to an ESC or motor failure that is not covered by the manufacturer's warranty.
Mamba XL2 Specs:
Max cells: 8s LiPo (33.6v)
BEC: 5 amp
Power Rating: 1/5th Scale RC
Size: L104.1 x H43.8 x W52 mm
Weight (w/wires): 241 g
Weight (w/o wires): 158.7 g
Wire gauge to motor: 8 gauge
Wire gauge to battery: 8 gauge
Castle 2018 Extreme Motor
When it comes to big performance, Castle believes it’s “go big or go home”! And when it comes to massive power for 1/5th scale vehicles, the Castle Creations 2028 motor isn’t going anywhere but to the top of the mountain.
Castle's engineers saw the need for a robust, high-efficiency brushless motor that would hold up to the heavy throttle and extended usage that 1/5th scale vehicles like the HPI Baja 5B and 5T encounter.
The 2028 Extreme
Even though the Castle 2028 has been around for a while, our engineers and product development team are never satisfied. That’s why we’ve taken an opportunity to make some performance-enhancing updates to this massive motor.
Revised stator and magnet shapes provide lower cogging torque for improved starting performance.
The new 800Kv rating will make the setup faster.
Rated at a higher RPM (45,000) due to improved manufacturing processes.
Capable of operating on 12S.
The end result is an “enhanced” Castle 2028 that now carries an 800Kv rating. These “go big” motors can easily run in the 10 horsepower range* - how much do you think that Fuelie 26S is putting out?
*Burst power output for durations typical of vehicle acceleration.
Other design features of the 2028 Extreme:
Sealed motor for survival in the dust and dirt that Bajas call home.
Four-pole design with 180C temperature rated magnets.
Highly-advanced slotted stator design made of the highest quality laminations.
Heavy-duty 8 mm shaft - no worries of breaking this shaft.
Are you prepared to go big? Really BIG? Have you ever seen a 1/5th scale Baja doing 112 kmh? Get ready, go do it, then do it again… and again with a Castle 2028 and Mamba XL2 controller.
Looking for a complete Castle Creations Baja Conversion kit for your HPI Baja 5B or 5T? Look no further.
Want to run a bit cooler? Check out the CC Blower for 20 Series motors.
Need a pinion? Check out our CC Pinions for 1/5th scale.
2018 Extreme Motor Specs:
Length: 113.2 mm
Diameter w/fins: 57 mm
Shaft Size: 8 mm dia & 30 mm long
Weight: 113 g
Max RPM: 45,000
800Kv
Controller Required: Sensorless only
Motor Mount Spacing: 30 mm
Material Specs:
High quality Japanese sealed bearings, 4 pole neodymium magnets, super thin stator laminations using high quality steel.